| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Suspension Control System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F5D000X |
| Title: SUSPENSION CONTROL: FRONT ACCELERATION SENSOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL ACCELERATION SENSOR ASSEMBLY (for LH Side)
(a) Install the acceleration sensor with the nut.
Torque: 8.5 N·m (87 kgf·cm, 75 in·lbf)
(b) Connect the acceleration sensor connector.
2. INSTALL ACCELERATION SENSOR ASSEMBLY (for RH Side)
(a) Install the acceleration sensor with the nut.
Torque: 8.5 N·m (87 kgf·cm, 75 in·lbf)
(b) Connect the acceleration sensor connector.
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
8. INSTALL INSTRUMENT SIDE PANEL LH
9. INSTALL INSTRUMENT SIDE PANEL RH
10. INSTALL COWL SIDE TRIM BOARD LH
11. INSTALL COWL SIDE TRIM BOARD RH
12. INSTALL FRONT DOOR SCUFF PLATE LH
13. INSTALL FRONT DOOR SCUFF PLATE RH
|
|